Web Serial only works in Chromium-based desktop browsers (Chrome or Edge). Firefox and Safari cannot run this tool. Open this page in Chrome or Edge to continue.
Pedal Clone Tool
Flash a downloaded replication image onto a blank ESP32-C3 board over Web Serial.
1. Get a clone image
Česky: Na zdrojovém zařízení otevřete záložku Advanced ve webovém
rozhraní pedálu a klikněte na Stáhnout obraz zařízení. Uloží se soubor
pedal-clone.bin (~4 MB). Vybraný soubor je zaručeně bez Wi-Fi hesel, licence nebo
logů (jsou nahrazeny 0xFF přímo ve streamu, na zdrojovém zařízení se nic nemění).
English: On the source device, open the Advanced tab in the pedal's
web UI and click Download device image. This saves a pedal-clone.bin file
(~4 MB). The file is guaranteed free of Wi-Fi passwords, license state, or logs (they are
replaced with 0xFF in the stream itself — nothing on the source device is modified).
2. Put the blank board into bootloader mode
Česky: Na ESP32-C3 SuperMini držte tlačítko BOOT, krátce stiskněte/přiveďte RESET (nebo odpojte a znovu připojte USB) a teprve poté uvolněte BOOT. Deska je teď v ROM bootloaderu a čeká na sériové spojení.
English: On the ESP32-C3 SuperMini, hold BOOT, tap RESET (or unplug/replug USB) while still holding it, then release BOOT. The board is now in its ROM bootloader, waiting for a serial connection.
3. Connect and flash
Clicking Connect opens Chrome/Edge's device picker — choose the blank board's serial port. This requires a one-time permission grant per device/browser.